Bell Performance's master mechanic James Dunst gets more than a few questions from the automotive public on aspects of lubricating oil. What's the best kind, how often should you change it, that kind of thing. One topic that seems to be on their minds is oil consumption - how much is too much and when should it be concerning?
So today, James Dunst gives a mechanics' eye view on the topic of normal vs. abnormal oil consumption for your vehicle.
With the consumer demand for more fuel-efficient vehicles, there have been a couple of engine changes that influenced the answer to this issue. These changes have affected the amount of oil an engine will consume by burning it and still be considered acceptable.
One change comes from changes in the piston ringers for the sake of fuel economy. The highest friction point in an engine is the point where the piston rings are in contact with the cylinder walls. The higher the ring tension, the more efficient they will be at scraping oil off the cylinder walls on the downward stroke of the piston. To reduce friction and achieve additional fuel economy, the auto manufacturers have reduced the piston ring tension. This ring tension change has resulted in small amounts of oil getting past the piston rings into the combustion chamber where it is burned. This is the primary cause of normal oil consumption in most properly serviced vehicles.
Another change that has affected oil consumption is the move to lighter motor oil. Oil use in the marketplace is shifting towards lightweight grades like 0W-20 to reduce friction and to better lubricate internal engine components in cold weather. This lighter oil tends to get by the piston rings and into the combustion chamber. The use of these lighter motor oils has resulted in oil escaping through oil seals and gaskets, which is usually not a problem with heavier-weight motor oil.
Standard motor vehicles that are consuming a quart of oil in less than 1,000 miles should be examined for the cause. Extremely high oil consumption, like one quart in 500 miles, can have a negative damaging effect on catalytic converters.