Maintaining today's stored backup fuels is a bigger job than it used to be. With the way fuels have changed, you're much more likely to encounter water and microbial growth problems in the essential emergency fuels that generators, hospitals, and municipalities rely on. It's virtually inevitable that stored fuel today will, eventually, develop microbial contamination.
Do you have reason to suspect you’re running on diesel or biodiesel contaminated by microbes, bacteria, and fungus? Here are some signs to look for which can give you a pretty good idea:
Some of these problems are more commonly seen in fleets and vehicle situations while others are seen to a greater extent in fuel storage and backup generator systems. But any of these symptoms can indicate a microbial infestation, whether in your storage tank or the place where you get your fuel from. Microbial contamination is now the biggest cause of fuel problems in stored fuels.
The best way to prevent microbial diesel fuel contamination is to control tank water buildup. Bell Performance Dee-Zol and DFS Plus are formulated to do this. But even the best housekeeping methods can fail sometimes, especially if not everyone in the supply chain is doing the same thing. Once you have a microbial problem, the only way to permanently end it is to kill it with a biocide like Bell Performance Bellicide. Controlling water is important, but as microbes don't need very much water present to grow and thrive, the chances are much higher that, at some point in your system's professional service life, you're going to have to deal with microbial contamination problems.
Lastly, the upstream oil and gas market has taught us the utility of microbial testing. Testing is the third arm of the Hybrid Approach to Fuel Care - chemical, mechanical, testing - that is the best practice for taking care of stored fuel. Testing is the diagnostic arm - it gives you the benefit of a clearly defined problem so you don't have to solely rely on inferences from what you notice.
If your system is in the "mission critical" category, it may be worth your while to consider upgrading to some kind of periodic microbial testing of fuel samples from your system. In-field microbial testings like ATP-By-Filtration can give you a much clearer picture of whether you have microbial contamination (and how much), as well as being an invaluable tool to show if the problem has been solved.
Do you have any other experiences? Feel free to comment and let us know.